ALL PRODUCTS

• Test most engine sensors - lambda, mass airflow (MAF), MAP, ABS, TPS, camshaft/crankshaft position and etc;
• Test various actuators and solenoids;
• Observe fuel injector and fuel pump signals;
• View CAN bus signals;
• Basic primary and secondary ignition measurements.

• Test most engine sensors - lambda, mass airflow (MAF), MAP, ABS, TPS, camshaft/crankshaft position and etc;
• Test various actuators and solenoids;
• Observe fuel injector and fuel pump signals;
• View CAN bus signals;
• Basic primary and secondary ignition measurements.

• Easy to use tool to reset DPF Soot Level in CAT C3.3 C3.8 Engines with DPF.
• 14 Pin CAT Connector

• Diagnostic tool ready to use with Caterpillar and Mitsubishi forklift trucks.
• Tested and ready to use out of box

• DPF Emulator for Caterpillar C3.3 Stage IIIB Plug & Play

• SCR / DOC Emulator for Caterpillar C4.4 Acert Tier 4F Plug & Play

• Made in Canada. Original interface which safe to use with CAT machines.
• Supports Caterpillar machinery and engines up to 2023
• This is the only recommended communication device for CAT and the only one that has CAT Data Link (CDL) protocol required to properly communicate with CAT engines.

CLAAS diagnostic cable 7 Pin to use with CLAAS CAN-USB Interface and CLAAS 4 CAN-WIFI Interface

CLAAS diagnostic cable 8 Pin to use with CLAAS CAN-USB Interface and CLAAS 4 CAN-WIFI Interface

• With the help of some optional features the CANUSB can be used for error monitoring and diagnostics
• Allow defects to be identified quickly and the on-board management system to be configured and updated

CLAAS diagnostic cable OBD2 to use with CLAAS CAN-USB Interface and CLAAS 4 CAN-WIFI Interface

• Best possible complete diagnostics and programming, troubleshooting, view diagnostic procedures and schemes for New Holland, CASE, KOBELCO, STEYR, FLEXICOIL

• Automatic machine for cutting keys XC-Mini Plus

• PC to EBS EB+
• For side of vehicle connection
• 6.5 m. Length

• PC to EBS EB+
• 6.5 m. Length

• EBS EB+ to DIAG+/Info-Centre
• 6.5 m. Length

• PC to EBS EB+
• 15 m. Length

• PC to EBS EB+
• 20 m. Length

• PC to EBS EB+
• For direct ECU connection
• 6.5 m. Length

• EBS EB+ to DIAG+/Info-Centre
• For ECU → 08 2005
• Length 0.45 m

• Current measuring clamps are designed for measuring extremely small currents. It is possible to measure direct and alternating current.

• Effectively cleans fuel injectors.
• It helps restore power and fuel economy.
• Helps improve idle and throttle response.
• Helps eliminate stalling due to dirty fuel injectors.
• Helps differentiate fuel injector working status.

• Intelligent Control Panel Design
• Ultrasonic Cleaning Tech
• Multiple Test Functions
• Backlight Design & Level Gauge

• Digital Display
• Automatic Cleaning and Testing
• Ultrasonic Cleaning
• Fuel Injector Testing
• Reverse Flush

• For GDI Injector Cleaning and Testing
• Advanced ultrasonic cleaning technology
• Multi-voltage selection
• Intelligent Design

• Wide Range of Injectors Supported
• Injector Cleaning and Testing Function
• Multiple Voltage Selection
• Upgrade Ultrasonic Cleaning
• 6-cylinder and 2-drain design
• Equipped with multiple parts and portable drawer

SCR / DOC Emulator for Cummins Engines QSB 4.5 / 6.7 , QSL 9  Tier 4 Final

SCR / DPF Emulator for Cummins Engines QSB 4.5 / 6.7 , QSL 9  Tier 4 Final

• Professional , Plug & Play Urea Level / Quality Sensor Emulator for Cummins® Industrial Engines

• New generation of current sensor ensure a rapid measurement for vehicle diagnostic. Voltage and current view on PC screen indicate battery condition, stater motor and engine wear.

• New generation of current sensor ensure a rapid measurement for vehicle diagnostic. Voltage and current view on PC screen indicate battery condition, stater motor and engine wear.

• New generation of current sensor ensure a rapid measurement for vehicle diagnostic. Voltage and current view on PC screen indicate battery condition, stater motor and engine wear.

• 2000A current clamps allow you to measure up to 2000 amps without cutting, disconnecting or tearing wires. Simply snap the clamps onto the cable you want to measure and connect the clamp to the PicoScope you are using.

The Curtis Model 1313 Handheld Programmer is a powerful and intuitive programming and diagnostic tool. The 1313 performs comprehensive programming and troubleshooting tasks for all vehicles that use Curtis programmable motor controllers or control systems.

• CV Commercial 1 year license;

• CV Commercial Software Activation;

• The only dedicated DAF diagnostic tool;
• Compatible with DAF trucks up to year 2017 (Euro 1-5);
• Has 2 types of cables for the newer and older trucks;

SCR Emulator for Daf  Euro 4/5 and EEV Trucks also for Buses with Daf Engine (DMCI).

• Professional Emulator of Retarder ECU EST 54 mounted in Daf Euro 6 2017->

• Error Code Cleaner / Eraser For Daf Euro 6 XG XF 2022

• Error Code Cleaner / Eraser for Daf Euro 6 Trucks XF 106 , CF Euro 6 2014 - 2017. Pocket Size

• Error Code Cleaner / Eraser For DAF trucks Euro 6 2017 till now.