-150x150w.jpg)
MERCEDES EURO 6 | DTC Error Code Cleaner / Eraser
Error Code Cleaner / Eraser for Mercedes Euro 6 Engines
- : In Stock! Estimated Delivery Time: 2-4 Days
- Brand: BALTICDIAG
- Model: MBcomER_E6
Error Code Cleaner / Eraser for Mercedes Euro 6.
Offered Error Code Cleaner is standalone device. Using of it is very easy and fast, just:
- Turn ignition ON (and wait couple seconds)
- Connect Eraser to diagnostic connector.
- Green lamp starts blinking, wait couple second until it light permanently green.
- Done ! All inactive errors from supported systems are cleared!
- If you need disable torque / speed reduction and off SCR malfunction lamp leave device connected to vehicle for additional 20 seconds. After this time green led start bink again and after couple second light permanently green. Done! Torqe / Speed limit is disabled. SCR malfunction lamp is off!
Eraser supported systems:
- All systems are supported
- ACM
- EBS
- ABS / ESP
- APS
- ASA
- ATA
- BESO
- CDS
- CGW
- CLCS
- COM
- CPC
- DCMD
- DCMP
- EAPU
- EIS
- HVAC
- IAC
- ICUC
- ITH
- MCM
- MPC
- MSF
- PPC
- RCM
- RDF
- RPS
- SAS
- SCA
- SCH
- SSAM
- TCM
- TCO
- TPM
- VRDU
Supported Models:
- Actros MP IV Euro 6
- Atego Euro 6
- Arocs Euro 6
This Device supports disabling Torque reduction after Exhaust After treatment System Failure !
The Error Code Cleaner check connection with the Machine. If there is no connection with Machine it inform about it with the Red indicator. Thanks to this you can be sure that unwanted errors have been removed!
What is the DTC Cleaner?
The DTC Cleaner is a device that effectively removes inactive errors or faults from a vehicle. It functions similarly to a diagnostic tool and needs to be connected to the OBD (On-Board Diagnostics) port. Once connected, it scans the vehicle's components by directly accessing their control units and clears any errors they may be displaying.
Why use a DTC Cleaner?
The DTC Cleaner proves invaluable when drivers need to erase faults on the go, especially those caused by faulty vehicle components. It requires no expertise in diagnostics as it can be effortlessly plugged in to do the job for the driver.
For instance, in cases where faults occur in the SCR (Selective Catalytic Reduction) system, drivers often find themselves restricted by a capped vehicle speed (Limp mode) after a specific duration, with the vehicle stuck in a single gear and limited to a maximum speed of 15-30 mph, resulting in sluggish performance, especially when carrying heavy loads.
Our DTC Cleaner can reset the Limp mode timer for the vehicle, allowing the driver to complete their tasks and conveniently reach a service center. If immediate SCR repairs are not feasible, worry not; you can use the DTC Cleaner as many times as needed until you're ready to address the SCR system repair.
What errors does it clear?
The DTC Cleaner functions like a "Clear All" button on a diagnostic system, enabling the clearance of any other inactive errors present in the vehicle. However, it cannot resolve errors resulting from active physical faults within the vehicle.
For specific information on the units to which the DTC Cleaners can connect and the faults they can clear, please feel free to contact us.
-120x100w.jpg "LAUNCH")
