Menu
Your Cart

FREE DELIVERY FOR ALL PRODUCTS!

DYNOPRO | Portable Road Dynamometer

DYNOPRO | Portable Road Dynamometer
DYNOPRO | Portable Road Dynamometer
DYNOPRO | Portable Road Dynamometer
DYNOPRO | Portable Road Dynamometer
DYNOPRO | Portable Road Dynamometer
DYNOPRO | Portable Road Dynamometer
DYNOPRO | Portable Road Dynamometer
DYNOPRO | Portable Road Dynamometer
DYNOPRO | Portable Road Dynamometer
DYNOPRO | Portable Road Dynamometer
DYNOPRO | Portable Road Dynamometer

DynoPro is a portable road dynamometer used to measure power, torque, acceleration and other parameters of motor vehicles. Measurements can be made on vehicles with any type of drive train system. This dynamometer is designed to be used by professionals in a wide range of road and motorsport vehicles.

UPS-FEDEX-EXPRESS DELIVERY

trust-pilot-reviews

Price:
3,322.00€
  • : In Stock! Estimated Delivery Time: 2-4 Days
  • Brand: BALTICDIAG
  • Model: DYNOPROROAD
  • SKU: BD16601

 

DynoPRO

 

The device its characterized by a compact housing made of aluminium and plastic.

Installation of the device takes about 2 minutes to be ready for measurement.

For the measurement, the vehicle weight and tire size are required (in the format e.g. 205/55/16 or circumference in mm).

The device has a built-in weather station for measuring temperature and atmospheric pressure (-40 ° + 100 °, 300-1100hpa). In addition, the device can read the atmospheric temperature from the OBD2 connector.

Communication with the DYNO probe and the OBD2 adaptor is made by the Bluetooth standard. Dyno probe has a built-in battery that allows about 10 hours of operation. The OBD2 adaptor is powered from the OBD2 connector.

In addition to the standard power measurement, the device enables logging of additional engine parameters via the OBD2 connector, e.g. boost pressure, pressure on the injection rail, exhaust gas temperature, etc., and placing them on a graph in relation to the power or torque graph.

The software, apart from measuring power, enables diagnostics of the engine controller in the EOBD standard (identification of the engine controller and diagnostic protocol, reading and erasing of DTC errors, measurement of actual values).

The measurement results are presented in 3 variants. Actual, DIN70020, SAE J1349 and EEC. Measurement repeatability error under the same procedure and conditions below 1%.

The software has no time and quantity operation limitations.
Free software updates. Technical support. 2 years Warranty. 

 

 

 

Installation of the device takes only 2 minutes!

Fast assembly and disassembly of the dynamometer allows you to take measurements anywhere and anytime, which will be most appreciated by mobile workshops.

 

Assembly and Measurement with dynoPRO Dynamometer 

 

The assembly of the device consists of 6 simple steps:

  1. selecting the appropriate size of the cap for the wheel bolt
  2. screwing the socket together with the pin to the bolt on the rim
  3. probe roughly centred on circle and screwed
  4. turning on the probe
  5. plugging the OBD2 connector into the vehicle socket
  6. switching on the tablet and launching the software.

Measurement of power in most cases requires about 1 km of the road section, possibly without gradients.

The measurement procedure consists of the following steps: 

  1. selecting the MEASUREMENT menu
  2. determining the profile of the measured vehicle (name, vehicle weight, tire size, RPM engine rotation signal sources – usually reading from OBD2 or calibrated)
  3. Power run consisting of:
  • start of measurement in the software

  • smooth start with the vehicle in 1st and 2nd gear

  • put in 3rd gear and quickly accelerate to the end of the engine rpm range, then put in neutral and the program will start counting down 10s to calculate rolling resistance and other

  • software will calculate power and torque once finished it willpresentit to the user.
  1. Generating measurement report (software generate report in PDF,JPG or CSV format and allows to share it through e-mail etc..

 

A - Protective case with foam insert
B -
Tablet (with DynoPRO app) in a protective case, charger
C -
Dyno probe - attached to the wheel of the vehicle
D -
OBD2 probe
E - Set of attachment sockets Dyno probes - 17mm , 19mm, 21mm , 22mm
F - M12 threaded pin for mounting
Dyno probes and M10 screw with spring washer
G - Allen wrench 8mm, 10mm and wrench 14mm

All components were made on CNC machine tools. Assembly elements
Are made of tempered quality steel.

10″ 16GB WiFi screen with dynoPRO software and charger.

The tablet included in the kit has a sturdy aluminum case and a protective plastic cap. Included with the tablet is a charger with a micro USB connector which, in combination with a mini USB adapter, allows you to charge the Dyno Probe.

 

Dyno Bluetooth Wireless Probe, with built-in weather station.

The Dyno probe is made of aluminum and spring steel. Communication is via Bluetooth standard. It has a built-in speed sensor, ambient temperature sensor and atmospheric pressure sensor. The probe is battery-powered, the operating time is about 10 hours. Battery charging is via a mini USB connector , an adapter is included with the charger. The charger from the Tablet is used.

OBD2 Diagnostic Probe supporting more than 10 diagnostic protocols.

The OBD2 probe transmits the vehicle's RPM signal and other actual parameters during the measurement in Bluetooth standard. In addition to the power measurement mode, the probe allows diagnostics of OBD2-compliant passenger cars.

The probe makes it possible to identify the engine controller and diagnostic protocol, read and clear errors, measure available real parameters from the engine controller. During the measurement, the user can select any real parameters, e.g. intake manifold boost pressure , engine temperature and others made available by the engine controller, and the program will automatically apply them to the power measurement chart.

Set of mounting accessories - 4 types of screw sockets, allen wrenches and flat wrenches.

An allen wrench of 8mm, 10mm and a wrench of 14mm.

Set of sockets for mounting Dyno Probe - 17mm , 19mm, 21mm , 22mm.

Pin with M12 thread for mounting Dyno Probe and M10 screw with spring washer.

 

 

 

Sturdy suitcase with solid construction, made of polypropylene combined with ABS.

 

Dyno Probe

Suitcase

  • weight: 180g
  • wireless connectivity: Bluetooth
  • power supply: Li-Ion 3.7V 1000 mAh battery
  • material: aluminum, steel
  • weather station: temperature from -40 ° C to 105 ° C, pressure from 500hPa to 1100hPa
  • weight: 2.5 kg
  • external dimensions: 40.6 x 33 x 17.4 cm (L x W x H)
  • material: polypropylene + ABS

OBD2 Adapter

Additional Information

  • weight: 50g
  • wireless connectivity: Bluetooth
  • communication with the vehicle: CAN, LIN, Single Wire CAN
  • power supply: 12V DC from the vehicle
  • material: ABS plastic
  • Normalization of measurements
    • SEA J1349
    • DIN 70020
    • EWG 80/1269
  • Supported protocols
    • ISO 15765-4 (CAN 250/500 kbps, 11/29 bit)
    • ISO 14230-4 (KWP 2000)
    • ISO 9141-2
    • ISO 15765
    • ISO 11898
    • SAE J1850 VPW
    • SAE J1850 PWM
    • SAE J1939 OBD (trucks and vans)
    • Single-Wire CAN (SW-CAN)
    • Medium-Speed CAN(MS-CAN)
    • Hight-Speed CAN( HS-CAN)
  • Measurement repeatability error: <± 1%
  • Free software updates
  • Total weight of the set: 5 kg
  • Technical support
  • Warranty 24 months

Tablet

  • weight: 655g
  • 9.6 inch screen, IPS, 1280 x 800 (HD)
  • Qualcomm MSM8917 Quad Core A53 CPU
  • Android ™ N operating system
  • ROM: 16 GB, RAM: 2 GB
  • GPS, A-GPS, GLONASS, BDS
  • LTE, UMTS, GSM, WIFI / WAPI 802.11 a / b / g / n @ 2.4GHz, 5GHz, Bluetooth connectivity
  • main camera: 5 Mpx, autofocus, front: 2 Mpx, autofocus
  • battery 3.7 V 4 800 mAh
  • 5V / 1A charger