-150x150w.jpg)
AutoTuner | Chiptuning Tool | ECUs and TCUs Programming
- Reading and writing of engine and gearbox controllers.
- Automatic checksum correction on engine map data.
- Resetting a vehicle to its original condition.
- No subscription fee. Free updates.
- : In Stock! Estimated Delivery Time: 2-4 Days
- Brand: AutoTuner
- Model: ATHWMASTER
AutoTuner
AutoTuner tool combines the latest technologies for efficient communication with the ECU, ultra-fast reading of memory content (internal or external flash and EEPROM) and automatic online backup of the TriCore password. That's right, nothing but the best.
12V power supply
It is important that you only use the power supply provided with your AutoTuner tool. And because we really want the best for you, the adapters for Europe, Australia, USA and UK are already included.
Advanced USB connection
AutoTuner is designed to last, namely thanks to a reinforced USB port.
Boot/bench Connection
The box contains the two necessary cables (universal and universal EDC16/ME(D)9) for connection to all ECUs.
OBD connection
An armoured cable that meets manufacturer standard is included in the case.
AutoTuner is already compatible with hundreds of units and thousands of vehicles.
Discover the features
ECU/TCU read and write
Reading and writing of engine and gearbox controllers.
Automatic checksum correction
Automatic checksum correction on engine map data.
Back to stock
Resetting a vehicle to its original condition.
Flash methods
OBD Method
Read and write via the OBD diagnostic socket.
Connect the tool to the OBD diagnostic socket
Turn ignition on
Reading and writing are performed through OBD diagnostic socket
Bench Method
This method doesn’t require to open the engine ECU. The connection is made on the outside plug of the ECU.
Start by removing the ECU from your car engine.
Don’t open the ECU
Reading and writing are performed through bench
Boot Method
This method requires to open the engine ECU. The connection is made on the ECU printed circuit board (PCB).
Remove the ECU
Open the ECU
Reading and writing are performed through Boot
Diagnostic methods
Datalogs Method
Real-time measurement and recording of engine parameters via OBD diagnostic socket. The connection is made via the OBD socket, then simply start the test to record the data. You can then view the graph online.
Select the car and start dyno run
Stop dyno run and upload
Analyze and share online
DTC Method
Reading and deletion of generic Diagnostic Trouble Codes (DTC) through the OBD-II socket.
Select the car and connect through the OBD-II socket
Launch the DTC reading protocol
Analyze and erase DTC
