GYSPOT EXPERT 400 | GYS | STEEL DENT-PULLING EQUIPMENT

Dedicated to the bodybuilder's various dent removal and straightening operations, the GYSPOT EXPERT 400 is a top-of-the-range device with a power rating of up to 4,500 A. Independent adjustment of welding current and time enables precise control of the impact of the weld on galvanised sheet metal, particularly thin sheet metal.

Precio:

1,115.69€

Cantidad

GYSPOT EXPERT 400

EQUIPMENT DESIGNED FOR PROFESSIONALS THAT REQUIRE COMPLETE CONTROL OF THEIR DENT PULLING PROCESS.

Designed to be connected to a 400V - 2ph power source with a 16A slow blow fuse, the GYSPOT EXPERT 400 can be used in two different modes:

A MANUAL mode, where the operative can independently set the welding current and welding time to fit the requirements of a particular job/material thickness.
A SYNERGIC mode : The machine will use the GYS Expert Engineers recommended settings. Simply select the tool to be used and the power is automatically set.

For extra control, two welding operations are available :

Automatic operation: the Arc begins when the tool is in contact with the metal sheet.
Manual operation: the Arc begins when the tool is in contact with the metal sheet and the trigger is pressed.

The EXPERT is designed to carry out multiple body shop tasks. The operative has the choice of 7 dedicated programs :

Ground cable 70 mm² (2m long cable)
2 pcs. Multifunction pistols (2 m long, 70 mm2 cable with connectors): inertial hammer, star alignment; welding of studs, rivets and rings; contact contraction; graphite pencil.
8 meter power cable
Accessory box: