-150x150w.jpg)
MaxiBAS BT608 | Autel | Battery And Electrical System Analyzer
- MaxiBAS BT608 is a battery and electrical system analysis tool;
- MaxiBAS BT608 can test 6- and 12-volt batteries up to 3000CCA and both 12-and 24-volt starting/charging systems.
- : En stock
- Marca: AUTEL
- Model: MaxiBAS-BT608
MaxiBAS BT608
The BT608 is a touchscreen Battery & Electrical System analyzer that applies Adaptive Conductance, an advanced battery analysis method that produces a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a battery’s true health. The BT608 can display a quick health status of the existing battery, register a new battery and perform advanced battery and electrical system diagnostics. The BT608’s VINscan function enables quick identification of the vehicle and battery specifications. Read/Clear codes on all available vehicles systems. Print or share customized reports via Wi-Fi or print test reports via the built-in thermal printer.
- Test 6- and 12-volt batteries: 100 - 3000 CCA
- Test 12- and 24-volt cranking/charging systems
- Test Flooded, AGM, AGM Spiral, EFB and GEL batteries
- Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA
- One-touch Battery registration
- Quick display of battery specifications through battery barcode scan, Auto and manual VIN entry
- Illustration instruction guides for battery positioning and testing
- Print test reports via built-in thermal printer
- Read and erase codes of all available systems
Adaptive Conductance
BMS Reset Functionality
System Detection
• Reduce Battery Misdiagnosis
• Diagnose Low Capacity Batteries
• Reduce Charge & Retest for Discharged Batteries
• Electrical System Reset
• One-Touch Battery Registration After Replacement
• Largest Vehicle Coverage: 53 Vehicle Makes
• Guided Battery Replacement Procedure with Prompted Memory Resets
• Battery Location Diagrams
| Operating System: | Android 9.0 |
| Screen Display: | 5.5'' LCD touch screen with 720*1280 resolution |
| Storage: | 32 GB |
| Connectivity: | Wi-Fi (802.11 a/b/g/n/ac),USB 2.0, Type C, BT5.0+EDR |
| Camera: | 8 Megapixel |
| Input Voltage: | 5 V DC |
| Working Current: | 450 mA at 7.7 V DC |
| Internal Battery: | 7.7 V, 3000 mAh |
| CCA Range: | 100 to 3000 A |
| Voltage Range: | 1.5 to 36 V |
| Working Temperature: | 0° to 50° C (32° to 122° F ) |
| Storage Temperature: | -10° to 60° C (14° to 140° F ) |
| Dimension (L x W x H): | -204 mm x 90 mm x 32 mm (8.03” x 3.54” x 1.25”) |
| Weight: | 510 g (1.12 lb.) |
Why does the BT608 kit include a VCI for the OBD-II connector?
The bluetooth VCI will allow communication between the vehicle and the BT608 to:
- AutoVIN and feed MMY info to the BT608.
- feed battery registration from the BT608 to the vehicle (Battery Change icon)
- clear codes (Diagnostics icon)
- perform vehicle reset procedures if required (Battery Reset icon)
Battery Data
Autel has partnered with the Battery Council International (BCI) to provide OE battery specifications, battery locations, and vehicle reset procedures that may be required after replacing the battery. Disclaimer: Vehicle battery information does not cover all vehicles. Additionally, a vehicle's battery list may include more than one battery since BCI will list all options approved by the OE. A visual of the battery is still recommened when inputing battery type into the BT608.
Features
- Test 6- and 12-volt Batteries: 100 - 3000 CCA
- Test 12- and 24-volt Cranking/Charging Systems
- Test Flooded, AGM, AGM Spiral, EFB and GEL Batteries
- Uses Adaptive Conductance Technology to Detect Battery Capacity, Reducing Misdiagnosis
- Auto Battery Reset / Print Test Reports Via Built-in Thermal Printer
- AutoScan and VinScan for Quick Vehicle Identification and Battery Specifications
- Illustration Instruction Guides for Battery Positioning and Testing
- Side and Top post adapters
- 5.5-inch Touchscreen
- Android 9.0
- Read and Erase Error Codes
- Includes Bluetooth VCI, Clamp Cables, Four Battery Side Post Terminals (types S & T) and Thermal Paper Roll
- Wireless Tablet Tool / 1.5 GhZ Quad-Core processor, 32GB memory, 2GB RAM and 6-Hour Battery Life
- Wi-Fi Software Updates
- OPTIONAL ACCESSORIES: DVOM leads, Amp Clamp
Printing Options
Print reports immediately after performing a test or later, all reports are saved in Data Manager.
- Built-in printer (kit includes 2 rolls of paper)
- WIFI printing via the Autel PC MaxiSuite desktop app
- Email
- Customizeable: Report title, shop information, technician name
-120x100w.jpg "LAUNCH")
