CP2100 | Micsig | Oscilloscope ultra-low current measuring clamp AC DC
CP2100 | Micsig | Oscilloscope ultra-low current measuring clamp AC DC
- Current measuring clamps are designed for measuring extremely small currents. It is possible to measure direct and alternating current.
Precio:
313.22€
- : En stock
- Marca: Micsig
- Model: CP2100
CP2100
Band width | DC ~ 800 KHz |
Rise time | ≤ 437.5 ns |
Ranges | 10 A / 100 A |
Output sensitivity | 0.1 V / A (10 A) 0.01 V / A (100 A) |
DC accuracy (typical) | 3% ±50 mA (10 A) 4% ±50 mA (100 A, 500 mA ~ 40 Apk) 15% (100 A, 40Apk ~ 100 Apk) |
Signal delay | < 150 ns (10 A) < 200 ns (100 A) |
Current measurement ranges | 50 mA ~ 10 Apk (10A) 1 A ~ 100 Apk (100A) |
Max. measuring current | 100 Apk, 70.7 Arms (DC + ACpk) 200 Apk-pk, 70.7 Arms (AC) |
Max. working voltage | CAT III 300 V, CAT II 600V |
Max. float voltage | CAT III 300 V, CAT II 600V |
Max. conductor diameter | 13 mm |
Overload alarm | Buzzer beeps, Button flashes |
Power supply | DC 5 V |
Features:
- Small and exquisite design
- Standard BNC connector, can be used with oscilloscopes and multimeters
- Automatic and manual zero value function
- The device is powered via a USB connection, no additional adapters are required
- A wide range of uses of the device