Menú
Your Cart

FREE DELIVERY FOR ALL PRODUCTS!

Current Clamps Pico Tech PicoBNC+ | 200A/2000A AC/DC 150V

Current Clamps Pico Tech PicoBNC+ | 200A/2000A AC/DC 150V
-17 %
Current Clamps Pico Tech PicoBNC+ | 200A/2000A AC/DC 150V
  • 2000A current clamps allow you to measure up to 2000 amps without cutting, disconnecting or tearing wires. Simply snap the clamps onto the cable you want to measure and connect the clamp to the PicoScope you are using.

UPS-FEDEX-EXPRESS DELIVERY

trust-pilot-reviews

Precio:
205.79€
247.11€

 

The TA388 has the same specifications as the popular TA167 200A/2000A terminals, but with a PicoBNC+ interface. When connected to an oscilloscope, the terminals can be automatically configured using the PicoScope software. The range is set automatically without requiring user intervention. The clamp is powered by wires, so it doesn't need any batteries.

These current terminals have been designed for use with PicoScope oscilloscopes. The Pico TA388 current clamp is available as an accessory in one of our popular diagnostic kits or separately, but these clamps require a PicoScope with PicoBNC+, such as the 4225A or 4425A.

Total length of cable and probe:2.85 m
Terminal size:32 mm
Weight:320g
Battery:No battery required
Operating current range:±2000 A DC/AC
Overload current:2200 A DC
Maximum voltage / CAT ratings:300V
Temperature coefficient:±0.1%
Accuracy:1% ± offset up to 1500 A / 5% from 1500 A to 2000 A
Operating temperature:0 °C to 50 °C
Storage temperature:from -20 °C to +85 °C
Operating humidity:15% to 85% (non-condensing)