-150x150w.jpg)
Euro 4 / 5 / 6 Trucks | Fault DTC Cleaner | Error Code Cleaner
- : In Stock! Estimated Delivery Time: 2-4 Days
- Brand: BALTICDIAG
- Model: BD25683
Available Options
Euro 4 / 5 / 6 Trucks Fault DTC Cleaner - Error Code Cleaner
.
The BalticDiag device will help to temporarily get rid of errors in the tractor's control units and dashboard, as well as reset the emergency mode timer. This will allow you to complete the trip without power limitation, or give you the opportunity to reach a service convenient for you without wasting time and fuel.
It's no secret that EURO 6 standard trucks are quite capricious and errors can appear on the dashboard at the slightest malfunction or software malfunction. Fixing bugs during the trip is problematic, and if you don't fix bugs in time, the truck can lose power and even enter emergency mode with a speed limit of 20 km/h. In emergency mode, it is difficult not only to reach the final point of the journey, but also to get to the nearest service center. Truck repair in a foreign country and cargo not delivered on time are unnecessary costs and inconveniences that can be avoided with the help of one device.
How this eraser works.
The device BalticDiag is very easy to use. All the driver has to do is turn on the ignition and insert the device into the diagnostic socket (OBD-II). The BalticDiag module will do the rest by itself. In a few seconds, it will diagnose the truck, remove errors and bring the truck out of emergency mode. After the work is done, you can easily continue your journey.
Usage:
- Turn on the ignition
- Insert the BalticDiag module into the diagnostic slot (OBD2)
- Wait a few seconds until the indicator light (OK) lights up
Note: The error eraser is programmed per vehicle. For an additional fee, it is possible to change the software version of the system installed in the module and adapt it to another vehicle. (This does not apply to Ford and Iveco cars)
What is the DTC Cleaner?
The DTC Cleaner is a device that effectively removes inactive errors or faults from a vehicle. It functions similarly to a diagnostic tool and needs to be connected to the OBD (On-Board Diagnostics) port. Once connected, it scans the vehicle's components by directly accessing their control units and clears any errors they may be displaying.
Why use a DTC Cleaner?
The DTC Cleaner proves invaluable when drivers need to erase faults on the go, especially those caused by faulty vehicle components. It requires no expertise in diagnostics as it can be effortlessly plugged in to do the job for the driver.
For instance, in cases where faults occur in the SCR (Selective Catalytic Reduction) system, drivers often find themselves restricted by a capped vehicle speed (Limp mode) after a specific duration, with the vehicle stuck in a single gear and limited to a maximum speed of 15-30 mph, resulting in sluggish performance, especially when carrying heavy loads.
Our DTC Cleaner can reset the Limp mode timer for the vehicle, allowing the driver to complete their tasks and conveniently reach a service center. If immediate SCR repairs are not feasible, worry not; you can use the DTC Cleaner as many times as needed until you're ready to address the SCR system repair.
What errors does it clear?
The DTC Cleaner functions like a "Clear All" button on a diagnostic system, enabling the clearance of any other inactive errors present in the vehicle. However, it cannot resolve errors resulting from active physical faults within the vehicle.
For specific information on the units to which the DTC Cleaners can connect and the faults they can clear, please feel free to contact us.
-120x100w.jpg "LAUNCH")
