Brake Fluid Exchanger AST618 | Autool

The AUTOOL AST618 is an advanced brake fluid exchanger designed for quick and efficient brake and clutch fluid replacement in vehicles. Equipped with a microcontroller, the device precisely controls brake fluid pressure, flow, and operation time. Highly automated, it can be operated by a single person, making it a user-friendly solution that saves both time and effort in vehicle maintenance.

Price:

577.69€

AUTOOL AST618

Four Wheels Oil Can Be Exchanged Simultaneously: Working pulse, working pressure, and working time can be adjusted. The configuration of the pressure gauge and digital display meter can easily observe the working parameters.
Considerate Design Details: AUTOOL AST618 does not need to exhaust the air in advance, the suction pipe can separate the moisture in the air, avoid mixing with the oil, and ensure the quality of the oil.
Stainless Steel Large-Capacity Oil Pot Design: Oil pot volume 3L Corrosion-resistant,collision-resistant, and durable.
Wide Application: Equipped with 15 different types of adapters and toolboxes, suitable for various car models in Europe, America, Asia, etc.

Note: No need to start the vehicle for the operation.
Step 1: Raise the car to a suitable height so the drive wheels are not on the ground.
Step 2: Connect the device’s four oil ports to the car’s brake cylinder. Then, loosen the exhaust screw on the brake cylinder to allow the oil to flow out.
Step 3: Pour 5 liters of new brake fluid into the equipment’s fuel filler port. Then, find the matching connector to connect to the brake master cylinder’s fuel filler.
Step 4: Connect to 12V car power and turn on the power switch button.
Step 5: Press the Vacuum Switch button.
Step 6: Press the Fuel Switch button to change the brake fluid.
Step 7: During the oil changing process, look at the car brake oil tank mouth, if the refueling is too slow, press the acceleration switch button on the device to accelerate refueling; if it’s too fast, press the deceleration switch button to slow down.
Step 8: After the oil change, drain the used oil from the equipment’s tank completely. If not fully emptied, it can damage the vacuum pump and prevent further oil change operations.